Publicación:
Application of AHP in the selection of additive manufacturing equipment based on the use of artifacts

Vista sencilla de ítem
dc.contributor.authorGarcía Domínguez, Amabel
dc.contributor.authorSánchez-Pérez, David
dc.contributor.authorLeón-Calero, Marina
dc.contributor.authorRodriguez-Hernandez, Juan
dc.contributor.authorClaver Gil, Juan
dc.date.accessioned2026-01-22T12:45:42Z
dc.date.available2026-01-22T12:45:42Z
dc.date.issued2025-11-11
dc.descriptionThe registered version of this article, first published in Rapid Prototyping Journal, is available online at the publisher's website: Emerald, https://doi.org/10.1108/RPJ-03-2025-0114
dc.descriptionLa versión registrada de este artículo, publicado por primera vez en Rapid Prototyping Journal, está disponible en línea en el sitio web del editor: Emerald, https://doi.org/10.1108/RPJ-03-2025-0114
dc.description.abstractPurpose Additive manufacturing (AM) has already become a real manufacturing trend and the presence of these technologies in technological companies, research centers, universities or schools is actually normal together with a significant increase of the number and variety of equipment available in each one of these contexts. Thus, choosing the most suitable process, equipment or material arise as a new goal to face because the complexity and impact of these decisions is much higher now than when the implementation of AM was at initial stages. This paper aims to explore the adaptive capacity of multi-criteria decision making (MCDM) techniques, specifically the Analytic Hierarchy Process (AHP), to help channel these complex decisions. Design/methodology/approach In this study, an initial methodological approach is carried out based on the combination of AHP with the manufacturing and metrological inspection of artifacts obtained from the set of printers available as alternatives. Findings Through a study case, the strengths and weaknesses of the proposed methodological approach are assessed and scenarios in which this kind of approaches can be useful are identified, drawing conclusions to guide the following steps in this line of research. Originality/value The application of MCDM techniques to guide decisions similar to those raised in this study, as well as the use of artifacts to assess the performance of available alternatives in response to certain needs of the design to be manufactured, has been addressed in the scientific literature. However, the combined use of both strategies proposed in this work is novel.en
dc.description.provenanceMade available in DSpace on 2026-01-22T12:45:42Z (GMT). No. of bitstreams: 1 Application of AHP in the selection of additive manufacturing equipment based on the use of artifacts.pdf: 7413418 bytes, checksum: e04a35bd40fd15f16a032ddbccfc03a6 (MD5) Previous issue date: 2025-11-11en
dc.description.versionversión final
dc.identifier.citationGarcía-Domínguez, A., Sánchez-Pérez, D., León-Calero, M., Rodriguez-Hernandez, J., & Claver, J. (2025). Application of AHP in the selection of additive manufacturing equipment based on the use of artifacts. Rapid Prototyping Journal, 1–25. https://doi.org/10.1108/rpj-03-2025-0114
dc.identifier.doihttps://doi.org/10.1108/RPJ-03-2025-0114
dc.identifier.eissn1758-7670
dc.identifier.issn1355-2546
dc.identifier.urihttps://hdl.handle.net/20.500.14468/31524
dc.journal.titleRapid Prototyping Journal
dc.language.isoen
dc.page.final25
dc.page.initial1
dc.publisherEmerald
dc.relation.centerE.T.S. de Ingenieros Industriales
dc.relation.departmentIngeniería de Construcción y Fabricación
dc.rightsinfo:eu-repo/semantics/openAccess
dc.rights.urihttp://creativecommons.org/licenses/by-nc/4.0/deed.es
dc.subject3305 Tecnología de la construcción
dc.subject.keywordsDecision support systemsen
dc.subject.keywordsAdditive manufacturingen
dc.subject.keywordsArtifactsen
dc.subject.keywordsMulti-Criteria decision makingen
dc.subject.odsODS 9 - Industria, innovación e infraestructura
dc.subject.odsODS 12 - Producción y consumo responsables
dc.subject.odsODS 4 - Educación de calidad
dc.titleApplication of AHP in the selection of additive manufacturing equipment based on the use of artifactsen
dc.typeartículoes
dc.typejournal articleen
dspace.entity.typePublication
relation.isAuthorOfPublication749d96f3-a0ba-49e6-80f5-af00f4652abb
relation.isAuthorOfPublication637006ae-ca6f-4558-beac-970aab69cb69
relation.isAuthorOfPublication.latestForDiscovery749d96f3-a0ba-49e6-80f5-af00f4652abb
Archivos
Bloque original
Mostrando 1 - 1 de 1
Miniatura
Nombre:
Application of AHP in the selection of additive manufacturing equipment based on the use of artifacts.pdf
Tamaño:
7.07 MB
Formato:
Adobe Portable Document Format
Descargar
Bloque de licencias
Mostrando 1 - 1 de 1
No hay miniatura disponible
Nombre:
license.txt
Tamaño:
3.62 KB
Formato:
Item-specific license agreed to upon submission
Descripción:
Descargar
Colecciones
Artículos y papers