Cargando...
Fecha
2025-12-05
Derechos de acceso
info:eu-repo/semantics/embargoedAccess
Título de la revista
ISSN de la revista
Título del volumen
Editorial
Elsevier
Citas
Resumen
This work presents a comprehensive analysis of the thermo-fluid parameters governing the design of external tubular solar receivers operating with pressurised gaseous and supercritical fluids. Contrary to the state of the art regarding the use of these fluids in central receivers, this study identifies an optimum threshold operating pressure of 40–50 bar, corresponding to energy efficiencies of approximately 82 %. Beyond this range, efficiency gains become marginal and do not offset the higher investment cost of a high-pressure installation.
Although the thermal performance of solar receivers is generally influenced by both pressure loss and total heat loss, the analysis shows that pressure loss has only a limited impact on external tubular receivers, whereas heat losses are the dominant factor. These losses primarily depend on the receiver's cooling effectiveness and external surface area. Cooling effectiveness improves with a higher overall heat transfer coefficient and a lower mean operating temperature. The primary parameters that reduce the external surface area are higher fluid pressure, a greater temperature rise between the receiver inlet and outlet and a larger tube diameter, provided that the maximum temperature remains below the material's allowable limit. This study also demonstrates that the total annualised cost of these pressurised receivers mainly depends on the investment cost, which is proportional to receiver dimensions. Consequently, all parameters that reduce the external surface area also reduce cost. Finally, different working fluids were compared. Among them, CO2 provides superior thermal performance and lower cost, primarily due to its high density at intermediate pressures, which decreases both pumping power requirements and receiver surface area.
Descripción
This is the accepted manuscript of the article. The registered version was first published in Applied Thermal Engineering 286, 129386, is available online at the publisher's website: https://doi.org/10.1016/j.applthermaleng.2025.129386
Este es el manuscrito aceptado del artículo. La versión registrada fue publicada por primera vez en Applied Thermal Engineering 286, 129386, está disponible en línea en el sitio web del editor: https://doi.org/10.1016/j.applthermaleng.2025.129386
Este es el manuscrito aceptado del artículo. La versión registrada fue publicada por primera vez en Applied Thermal Engineering 286, 129386, está disponible en línea en el sitio web del editor: https://doi.org/10.1016/j.applthermaleng.2025.129386
Categorías UNESCO
Palabras clave
external tubular solar receiver, pressurised heat transfer fluid, threshold pressure, thermal performance, total annualised cost, carbon dioxide
Citación
Montes, M.J., Linares, J.I., Kwan, P.-W., Ireland, P., Guedez, R., 2026. Towards a general design framework for external tubular solar receivers using pressurised gaseous or supercritical fluids. Applied Thermal Engineering 286, 129386. https://doi.org/10.1016/j.applthermaleng.2025.129386
Centro
E.T.S. de Ingenieros Industriales
Departamento
Ingeniería Energética