Persona: Marcos del Cano, José Daniel
Cargando...
Dirección de correo electrónico
ORCID
0000-0002-2703-0918
Fecha de nacimiento
Proyectos de investigación
Unidades organizativas
Puesto de trabajo
Apellidos
Marcos del Cano
Nombre de pila
José Daniel
Nombre
2 resultados
Resultados de la búsqueda
Mostrando 1 - 2 de 2
Publicación Downsizing strategy for an air-cooled indirect-fired single-effect ammonia-water absorption chiller in part-load operation in hot climates(Elsevier, 2024) Palacios Lorenzo, María Esther; Marcos del Cano, José DanielA modular mathematical model has been created to simulate an ammonia-water absorption refrigeration system indirectly fired and air-cooled. The model includes governing equations based on mass, species, and energy balances, implemented for the main components of the system. It accounts for both thermal and mass resistances in the transfer processes that occur in the system. The study evaluates the performance of the ROBUR® absorption refrigeration system, model ACF60-00 LB, operating under part-load conditions, driven by hot water temperatures ranging between 160 and 210 °C, while the ambient temperature remains up to 40 °C. This refrigeration system is characterised by including an extra valve that allows active control of the pressure levels of the system. The analysis focusses on the effect of its active control on the size of the system. The results show that increasing the pressure loss in this valve reduces the size of the air-cooled absorber to 37.3 % of its nominal size at an ambient temperature of 40 °C, while the reduction in refrigerant mass flow is 18.5 %, while the condenser size decreases 3.1 times. Evaporator, air-cooled absorber and condenser effectiveness are minimally affected. Additionally, contribution of condenser and evaporator to exergy destruction is balanced.Publicación Thermodynamic analysis and systematic comparison of solar-heated trigeneration systems based on ORC and absorption heat-pump(MDPI, 2021-08-01) García Domínguez, Jesús; Marcos del Cano, José DanielModular and scalable distributed generation solutions as combined cooling, heating and power (CCHP) systems are currently a promising solution for the simultaneous generation of electricity and useful heating and cooling for large buildings or industries. In the present work, a solar-heated trigeneration approach based on different organic Rankine cycle (ORC) layouts and a single-effect H2O/LiBr absorption heat pump integrated as a bottoming cycle is analysed from the thermodynamic viewpoint. The main objective of the study is to provide a comprehensive guide for selecting the most suitable CCHP configuration for a solar-heated CCHP system, following a systematic investigation approach. Six alternative CCHP configurations based on single-pressure and dual-pressure ORC layouts, such as simple, recuperated and superheated cycles, and their combinations, and seven organic fluids as working medium are proposed and compared systematically. A field of solar parabolic trough collectors (SPTCs) used as a heat source of the ORC layouts and the absorption heat pump are kept invariant. A comprehensive parametric analysis of the different proposed configurations is carried out for different design operating conditions. Several output parameters, such as energy and exergy efficiency, net electrical power and electrical to heating and cooling ratios are examined. The study reveals that the most efficient CCHP configuration is the single-pressure ORC regenerative recuperated superheated cycle with toluene as a working fluid, which is on average 25% and 8% more efficient than the variants with single-pressure simple cycle and the dual-pressure recuperated superheated cycle, respectively. At nominal design conditions, the best performing CCHP variant presents 163.7% energy efficiency and 12.3% exergy efficiency, while the electricity, cooling and heating productions are 56.2 kW, 223.0 kW and 530.1 kW, respectively